AVS Chrome Hood Shield Руководство по установке

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары AVS Chrome Hood Shield. AVS Chrome Hood Shield 6 страниц.
Также для AVS Chrome Hood Shield: Инструкции по установке (2 страниц), Руководство по установке (7 страниц), Руководство по установке (7 страниц), Руководство по установке (6 страниц), Руководство по установке (6 страниц), Руководство по установке (6 страниц), Руководство по установке (6 страниц), Руководство по установке (10 страниц), Руководство по установке (6 страниц)

Bugflector

For proper installation and best possible fit, please read all instructions BEFORE you begin.

For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.

Important Safety Information

• CAUTION - Before driving, ensure that the hood shield is properly anchored to vehicle.

• Do not use automatic "brush-style" car washes.

• Do not use cleaning solvents of any kind.

• Periodically check all components for tightness.

Contents

NOTE: Actual product may vary from illustration.

Tools Required

Car Wash Supplies

Preparation Before Painting / Installation

• A trial fit is recommended to ensure proper positioning and fit.

• Check fit of parts before painting as we will not accept the return of modified or painted parts.

• Wash your vehicle's hood to remove any debris and/or dirt.

• Dry the hood with a clean towel.

• Do NOT install hood shield if vehicle does NOT have a factory installed hood seal / gasket.

Installation Steps

Remove (6) plastic seal retaining fasteners that align with the pre-

drilled holes in the hood shield. Next, carefully separate the hood

seal / gasket from the areas of the hood that align with the hood

shield flange.

NOTE: Exercise extreme caution not to tear

or damage the hood seal / gasket when

seperating from hood.

Installation Instructions

- Bugflector II

Hood Shield

NOTE: Actual application may vary slightly from illustrations.

- Carflector

- Chrome Hood Shield

Bump On

Clean Towel

Reposition the hood shield with the tabs sliding between the

hood and rubber seal and align with holes.

Page 1 of 2

I - Sheet Number BF111 Rev.A

™

Plastic Washer

Appropriate hand tools

Screw