AVS RXPRO Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильная сигнализация AVS RXPRO. AVS RXPRO 10 страниц. 4-channel controller

Печатать страницу
TIMED OUTPUT
1.
Enter programming mode (see page 3)
2.
3.
4.
5.
TIMED OUTPUT TIMER PROGRAMMING
1.
Enter programming mode (see page 3)
2.
3.
4.
5.
6.
Press button 3 repeatedly until the channel lights indicate one
of the output channels you wish to program.
Press button 2 repeatedly until the feature lights are on as
shown.
Press button 1 to swap the feature light(s) between flashing
and not flashing.
Flashing
OR
Timed Output off.
Press and hold button 2 on the remote control until the lights
start scrolling.
The output has now been programmed.
Press button 3 repeatedly until the channel lights indicate one
of the output channels you wish to program.
Press button 2 repeatedly until the feature lights are on as
shown.
Press button 1 repeatedly (either once or twice) to set the
feature light(s) to flashing.
To begin recording the desired output time press button 1. The
feature light(s) will stop flashing to indicate recording.
Note: the maximum time is 75 seconds.
Once the desired output time has elapsed press button 2 to
stop recording. The feature lights will appear as shown to
indicate the recording has been confirmed.
Not Flashing
Timed
Output
on.
seconds, see below to change the
time.
Default
0.5
Page 6