AVS RM43B-ARM Руководство по установке - Страница 2

Просмотреть онлайн или скачать pdf Руководство по установке для Монитор AVS RM43B-ARM. AVS RM43B-ARM 4 страницы.

Печатать страницу
AVS RM43B/RM43B-ARM/RM43B-RANGER
WIRE COLOUR
FUNCTION
RED (ACC)
+12v ACC supply
BLACK
Earth
FEMALE RCA
V2 camera input
MALE RCA
V1 camera input
PARKING LINE PATTERNS
BUTTON
MENU
UP/DOWN ARROWS
BRIGHTNESS
CONTRAST
COLOUR
PARKING LINE TYPE*
PARKING LINE X*
PARKING LINE Y*
*PARKING LINE
ON/OFF
LOGO SELECT**
** LOGO ON/OFF
RESET
AVS RM50M
WIRE COLOUR
FUNCTION
RED (ACC)
+12v ACC supply
BLACK
Earth
FEMALE RCA
V2 camera input
MALE RCA
V1 camera input
BUTTON
FUNCTION
M
MENU – push to enter menu and scroll through functions – brightness – contrast – colour – sharpness - reset
< >
Use to adjust each menu feature
CONNECT TO
Appropriately fused +12v switched ACC supply
Good earth source e.g. vehicle body/chassis
Reverse camera output. Monitor will auto switch to display this input when a signal is
detected e.g. when the car goes into reverse and powers on the camera. The display will
switch back to V1 or turn off if there is no signal on V1.
Camera output. Monitor will display V1 until a signal is detected on V2 or switch off if no
signal on V1.
FUNCTION
MENU – push to enter menu and scroll through functions
Use to adjust each menu feature
Adjust the screen brightness between 0-40 (default is 20)
Adjust screen contrast between 0-40 (default is 20)
Adjust screen colour between 0-40 (default is 20)
Choose between 1 of 10 patterns*
Adjust the left/right angle (0 = left, 40 = right, 20 = centre, default)*
Adjust the up/down angle (0 = bottom, 40 = top, 5 = default)*
* This feature must be turned ON before you can adjust the other parking line features
Choose a start-up logo (VW, Toyota, Hyundai, Nissan, Mazda, Kia, Honda, Suzuki, Chev, Ford)
** This feature must be turned ON before you can choose a logo
Push up arrow to confirm, resets to factory default values on all menu items
CONNECT TO
Appropriately fused +12v switched ACC supply
Good earth source e.g. vehicle body/chassis
Reverse camera output. Monitor will auto switch to display this input when a signal is
detected e.g. when the car goes into reverse and powers on the camera. The display will
switch back to V1 or turn off if there is no signal on V2.
Camera output. Monitor will display V1 until a signal is detected on V2 or switch off if no
signal on V1.