CPG 351GMCPG15NL Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Гридл CPG 351GMCPG15NL. CPG 351GMCPG15NL 14 страниц. Countertop griddles
Также для CPG 351GMCPG15NL: Руководство пользователя (9 страниц)
Печатать страницу
USER MANUAL
LIGHTING INSTRUCTIONS
The pilot light on the griddel has been pre-set at the factory. A screwdriver may be required for the initial lighting
to adjust the flame for your elevation.
1.
Turn off the manual valve and wait 5 minutes to clear air gas.
2.
Turn all knobs to "OFF" position.
3.
Hold an ignition source (match) at pilot. When the flame is established, remove ignition source.
4.
Turn burner knobs to "ON". If the burner does not ignite, promptly open pilot valve more. If pilot flame appears
larger than necessary, turn it down and reset burner ignition. The pilot flame should be as small as possible but
large enough to guarantee reliable ignition of burners when knobs are turned to "ON".
LIGHTING MAIN BURNER:
CPG MANUAL GRIDDLES
To light burner, turn knob to "ON." Then back off to the desired flame level. The range of adjustment is virtually
infinite between "ON" and "OFF".
CPG THERMOSTATIC GRIDDLES
1.
Select the burner required, depress and turn the corresponding gas control knob counter-clockwise
to "PILOT" position.
2.
With the gas control knob depressed, manually light pilot burner.
3.
Release gas control knob approximately 10-20 seconds after lighting pilot burner.
4.
Pilot burner should stay lit. Provided it does not, repeat steps 2 and 3.
5.
Rotate gas control knob counter-clockwise to desired temperature mark.
6.
The main burner will now be ignited automatically.
6
www.CookingPerformanceGroup.com