Allied Telesis Rapier 8/8MT Руководство по быстрой установке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Переключатель Allied Telesis Rapier 8/8MT. Allied Telesis Rapier 8/8MT 12 страниц. Rapier switch
Также для Allied Telesis Rapier 8/8MT: Руководство по быстрой установке (11 страниц), Руководство по быстрой установке (13 страниц)

Set the communication parameters

Set the communication parameters on your terminal or terminal emulation

program to:

•

Baud rate: 9600

•

Data bits: 8

•

Parity: None

•

Stop bits: 1

•

Flow control: Hardware

After the switch has booted, the log in prompt appears. If the log in prompt

doesn't appear, press [Enter] two or three times.

When the switch boots for the first time it automatically creates an account

with manager privileges. The account has the log in name "manager" and

the password is "friend".

At the log in prompt, enter the log in name and password.

Password: friend

The switch's command prompt appears and you can now configure the

switch using the command line interface.

Change the password as soon as possible. Leaving the manager account with

the default password is a serious security risk. Make sure you remember the

new password as there is no way to retrieve it if it is lost.

Use the following command to change the account password:

set password

Load command line interface help files

To access CLI help, enter:

set help=help-filename

where help-filename is the name of a help file stored in flash.

To see a list of files stored in flash, enter:

show file

Help files have an HLP extension.

To display a list of help topics, enter:

help

To display help on a specific topic, enter:

help topic

Alternatively, type a question mark (?) at the end of a partially completed

command to see a list of valid options.

See the Rapier Switch Software Reference for more information on

configuring the switch.

Rapier Switch

C613-04017-01 REV F