DG SATA-IP Инструкция - Страница 2

Просмотреть онлайн или скачать pdf Инструкция для Компьютерное оборудование DG SATA-IP. DG SATA-IP 10 страниц.

Печатать страницу
dg_sata_ip_dev_demo_instruction_at7_en.doc

2 Demo setup

1. Power off system
2. Connect AB14-CLKSMA board to AC701 board. J1 and J2 which are SMA connector on
AB14-CLKSMA board are connected to J25 and J26 which are SMA connector on AC701
board, as shown in Figure 2-1.
3. Connect power connector (Red cable) of AB14-CLKSMA board to pin 1 of J54 on AC701
board, as shown in Figure 2-1.
Note: AB14-CLKSMA board is provided by Design Gateway.
4. As shown in Figure 2-2, connect SATA cable to AB02-CROSSOVER and then connect to
AB10-PATAFMC. After that, connect another side of SATA cable to SATA-II connector on
PC.
Figure 2-2 SATA connection between AB10 and SATA-II on PC
17-Jun-21
Figure 2-1 CLKSMA board connecting to AC701 board
Page 2