Avsl Citronic 172.106UK Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Усилитель Avsl Citronic 172.106UK. Avsl Citronic 172.106UK 4 страницы. Class-d power amplifier

Печатать страницу

Specifications

Model

AVSL ref.

Power supply

Fuse

Output: RMS @ 4Ω

Output: RMS @ 8Ω

Bridge power: RMS @ 8Ω

Amplifier: construction

Frequency response

Signal connection

Speaker connection

Input sensitivity

Dimensions

Weight

Troubleshooting

No power light on either channel

Power lights on but no other LEDs and no

output

Power light and Signal LEDs are lit but no

output

Power or Audio Protect LED is lit and there

is no output

Output is very distorted and "LIMIT" LEDs

are lighting continuously

Output is working but at very low level

Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste

at the end of its useful life. The goods must be disposed of according to your local council guidelines.

AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland

D300

172.103UK

200-240Vac, 50/60Hz (IEC)

T6.3AL 250V

2 x 150W

2 x 75W

300W

Class-D

20Hz-20kHz ±0.5dB

L+R XLR female inputs, L+R XLR male outputs (through)

L+R SPK connectors (+1 for Bridge mode)

0.775V - 1.0V - 1.44V switchable

482 x 245 x 44 mm (1U)

3.50kg

Ensure IEC inlet is connected to mains and lead is in good condition

Ensure mains outlet is switched on

Check input signal and connection leads

Ensure channel gain controls are not turned fully down

Check speaker cabinets are in good working order

Check speaker leads are in good condition and connected properly

Switch off and disconnect from mains

Check speakers are in good working order and not shorted out (using a multi-tester)

After checking all connected items, power up again

If still in Protect Mode, switch off again and refer to qualified service personnel

Ensure cooling vents are clear and amplifier is not overheated

Check the speaker impedance is not below 4Ω per channel (8Ω if bridged)

Turn down the input level from audio source

Turn down channel output level controls

Ensure input source is at line level

Switch the Sensitivity setting to a lower voltage

Increase input level from audio source

Turn up channel output level controls

AVSL Group Ltd. Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ

D600

172.106UK

200-240Vac, 50/60Hz (IEC)

T8AL 250V

2 x 300W

2 x 150W

600W

3.77kg

D1000

172.110UK

T10AL 250V

2 x 500W

2 x 300W

1000W

3.93kg

D-series Amplifiers User Manual