AVstumpfl vario SHIFT-LEG ADAPTION Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Аксессуары для проекторов AVstumpfl vario SHIFT-LEG ADAPTION. AVstumpfl vario SHIFT-LEG ADAPTION 13 страниц.

Печатать страницу

HEIGHT, LEG LENGTH AND

ADAPTER POSITIONING

Determination of the adapter position and leg length according to the frame height and the desired

setup height (s).

(Picture Vario 64)

1. SETUP HEIGHT:

Choice of setup height A

For maximum installation heights, please refer to the corresponding data sheet for the type of leg used.

2. LEG LENGTH :

Select the leg length according to the desired setup height.

Leg length must be higher than A+B (Picture above)

= positioning of frame adapters

A = setup height

B = bottom frame corner to upper sliding module

3. ADAPTER POSITIONING

Make sure that the position for the frame adapter is chosen so that the frame parts can be assembled

unhindered, the sliding modules can be mounted and the projection surface can be attached.

The following minimum clearances must be observed:

3.1. Distance from fastening points of the projection surface (front of profile): A= 25mm (1")

(Picture Vario 32)

(Picture Vario 64)