Allied Telesis Routers and Switches Информационный лист - Страница 3
Просмотреть онлайн или скачать pdf Информационный лист для Сетевой маршрутизатор Allied Telesis Routers and Switches. Allied Telesis Routers and Switches 15 страниц. Allied telesis router and switch data sheet
Печатать страницу
Example of Basic Redundancy
Configure Load Balancer 1
1. Name the router
Name this router LB-1.
2. Create the VLANs
Create the three VLANs that this example uses:
•
VLAN 2 for the public Internet side
•
VLAN 3 for the private LAN side
•
VLAN 4 for managing the load balancer redundancy
3. Add ports to the VLANs
Add ports to the three VLANs.
4. Configure IP on the VLANs
Enable IP.
Give the public VLAN a unique public address. Note that public clients will not browse to
this address; they will browse to the virtual balancer's IP address instead (see step 8).
Give the private VLAN a private address. Note that the servers will not use this address as a
gateway; they will use the VRRP virtual address instead (see step 7).
Give the redundancy management VLAN a private address.
Configure Load Balancer Redundancy on Allied Telesis Routers and Switches
set system name=LB-1
create vlan=vlan2 vid=2
create vlan=vlan3 vid=3
create vlan=vlan4 vid=4
add vlan=2 port=1
add vlan=3 port=2-4
add vlan=4 port=5
enable ip
add ip int=vlan2 ip=172.214.1.3 mask=255.255.255.0
add ip int=vlan3 ip=192.168.1.200
add ip int=vlan4 ip=192.168.2.2
3