Avtech AVT1105TP Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности Avtech AVT1105TP. Avtech AVT1105TP 7 страниц. Ir dome camera

INSTALLATION

Step1: Find the wrench supplied in the sales package, and loosen the screw as indicated below to loosen

the joint lock of the bracket.

Note:

for lock, and for

Step2: Locate where to install this camera, and fasten the bracket to the ceiling or wall.

Then, adjust the viewing angle of the camera, and fasten the screw to secure the joint lock of the

bracket.

Note:

for lock, and for

CONNECTION

1. DC12V Input Terminal

Connect the power terminal of the camera to a DC 12V regulated power supply.

Note: Please use the correct power adaptor, DC12V (regulated), to operate this unit. The power tolerance of

this unit is DC12V ± 10%. Over maximum DC 12V power input will damage this unit.

2. Video Output Connector (VIDEO OUT)

Connect the camera video output to the video input of a DVR with 75Ω coaxial cable.

Note: To ensure the camera has sufficient protection against moisture, an extra waterproof measure, such as

by using an insulating tape, must be used to cover the power and video connectors after connection.

WIRE INDICATION FOR ALARM CONNECTION

COLOR

FUNCTION

Yellow

ALARM IN

* Please use with a 3V relay.

unlock.

COLOR

FUNCTION

Blue

ALARM OUT

COLOR

FUNCTION

Black

GND