Avtech AVT583 Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности Avtech AVT583. Avtech AVT583 14 страниц. Speed dome camera

PACKAGE CONTENT



Camera

Step1: Loosen the screws on the dome cover to remove it (as shown in Figure 1), and take all EPE foam rolls off in the

camera.

NOTE: When you remove the EPE foam rolls, please be careful not to damage the inner mechanism

of the camera.

Then, replace the cover back.

NOTE: Make sure the dome cover is clean without fingerprints before replacing it back.

Step2: Pass the cables to be connected through the bracket, and fasten the bracket to the wall (ash shown in Figure 2).

Figure 1

Step3: Hook the camera and the bracket together with the supplied carabiner, and connect the cables. Then, pull the

cables from the other side of the bracket to hide the connectors in the bracket (as shown in Figure 3).

Step4: Insert the camera to the bracket, and roate the camera a little bit to hook it. Then, use a wretch to fasten the

screws on the two sides of the bracket to secure the connection (as shown in Figure 4).



User manual

Figure 3



Bracket (w/carabiner)

Figure 2

Figure 4