Avtech AVT583 Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности Avtech AVT583. Avtech AVT583 14 страниц. Speed dome camera

Печатать страницу

CRUISE SETUP

Step1: In the live view, right click to show the main menu.

Select ADVANCED CONFIG  DCCS. Then, select the channel which connects this camera,

and click SETUP to enter the menu of camera parameters.

CAMERA

DETECTION

ALERT

NETWORK

DISPLAY

RECORD

DCCS

NOTIFY

MULTICASTING

EXIT

Step2: Select CRUISE MODE, and choose CRUISE. Then, go to CRUISE CONFIG to select

SETUP.

Step3: You'll see the setting panel on the bottom right side of the screen:

a) Select the cruise group to which you want to record the route. There are 4 groups to be used.

b) Move to the scene you want the cruise to be started.



c) Click

and scroll the mouse to zoom in / out. You'll see

NOTE: The closer these two icons, the slower the camera moving; the farther these two icons, the

faster the camera moving.

NOTE: You have 200 seconds to customize the cruise route.

d) Click  to stop route planning, and click  to replay the route you just made. To discard the

route you just made, click

Step4: Right-click to return to the live view, and click the channel with this speed dome camera

connected. Then, click

and select

NOTE: To stop camera cruising, click

ADVANCED CONFIG

CH1

CH2

CH3

SETUP

F.W.

1016

DEVICE

AVTXXX

CONNECTION

(Record). Then, drag and hold the mouse to move the camera for route planning,

on the bottom left side of the screen to show the PTZ control panel,

to start.

again to escape.

CH4



and

on the screen.