Dell Alienware M11xR2 Руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ноутбук Dell Alienware M11xR2. Dell Alienware M11xR2 44 страницы. Service manual

Печатать страницу

Advanced Menu

Allows you to enable or disable the Intel SpeedStep technology. Disabling this feature may improve performance, but will greatly reduce

Intel SpeedStep®

battery life.

Allows you to enable or disable the Intel eXecute Disable bit.

Use XD Capability

Allows you to enable or disable the USB emulation feature. This feature defines how the BIOS, in the absence of a USB-aware operating

USB Emulation

system, handles USB devices. USB emulation is always enabled during POST (Power On Self Test).

NOTE:

You cannot boot any type of USB device (floppy, hard drive, or memory key) when this option is off.

Allows you to enable USB devices to wake the computer from standby or to disable the USB wake support feature.

USB Wake Support

NOTE:

If USB Powershare is enabled, a device connected to the USB Powershare connector may not wake the computer.

Allows you to enable or disable the IEEE 1394 A connector.

IEEE 1394

Disabled: The IEEE 1394 A connector is disabled and is not visible to the operating system.

Enabled: The IEEE 1394 A connector is enabled.

Allows you to enable or disable the on-board LAN controller.

Integrated

Network

Disabled: Internal LAN is disabled and is not visible to the operating system.

Enabled: Internal LAN is enabled.

Allows you to enable or disable the internal high definition audio device.

High Definition

Audio

Disabled: The internal audio device is disabled and is not visible to the operating system.

Enabled: The internal audio device is enabled.

Allows you to enable or disable the internal SD card reader.

SD Card Reader

Allows you to enable or disable the Intel CPU turbo mode performance option.

CPU Turbo Mode

Allows you to enable or disable CPU bus clock Over-Clocking

CPU Over-Clocking

Disabled: CPU bus clock is 133 MHz.

Enabled: CPU bus clock is between 134 MHz and 166 MHz.

Allows you to configure the operating mode of the integrated SATA hard drive controller.

SATA Operation

ATA: SATA is configured for ATA mode.

AHCI: SATA is configured for AHCI mode.

Displays the installed SATA hard drive model.

SATA HARD DRIVE

Allows you to choose if the computer should display warning messages when you use certain power adapters. The computer displays

Adapter Warnings

these messages if you attempt to use a power adapter that has too little capacity for your configuration.

Disabled: BIOS will not detect unsupported AC adapters and will not display any message on the screen.

Enabled: BIOS will detect unsupported AC adapters and display an error on the screen.

Allows you to enable or disable battery charging.

Charger Behavior

Allows you to enable or disable charging of devices plugged into the USB Powershare connector while in Battery Mode.

USB Powershare

Wireless Menu

Allows you to enable or disable the internal Bluetooth device.

Bluetooth

Disabled: The internal Bluetooth device is disabled and is not visible to the operating system.

Enabled: The internal Bluetooth device is enabled.

Allows you to enable or disable the internal wireless device.

Wireless Network

Disabled: The internal wireless device is disabled and is not visible to the operating system.

Enabled: The internal wireless device is enabled.