Dell Inspiron 1011 Руководство по эксплуатации - Страница 41
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ноутбук Dell Inspiron 1011. Dell Inspiron 1011 43 страницы. Service manual
Также для Dell Inspiron 1011: Руководство по эксплуатации (43 страниц)
Печатать страницу
Back to Contents Page
USB and SIM Card Board
Dell™ Inspiron™ 1011 Service Manual
Removing the USB and SIM Card Board
Replacing the USB and SIM Card Board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the USB and SIM Card Board
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Remove the keyboard (see
4. Remove the palm rest (see
5. Remove the hard drive (see
6. Remove the palm rest bracket (see
7. Disconnect the USB and SIM card board cable from the system board connector.
8. Remove the screw that secures the USB and SIM card board to the computer base.
9. Lift the USB and SIM card board out of the computer base.
1
screw
2
USB and SIM card board
Replacing the USB and SIM Card Board
1. Align the holes on the USB and SIM card board to the protrusions on the computer base.
2. Replace the screw that secures the USB and SIM card board to the computer base.
3. Connect the USB and SIM card board cable to the system board connector.
4. Replace the palm rest bracket (see
Begin.
Battery).
Removing the
Keyboard).
Removing the Palm
Rest).
Removing the Hard
Drive).
Removing the Palm Rest
Bracket).
Replacing the Palm Rest
Bracket).
Removing the
Battery) before working inside the