Dell Inspiron 1320 Руководство по эксплуатации - Страница 23
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ноутбук Dell Inspiron 1320. Dell Inspiron 1320 46 страниц. Dell inspiron inspiron 13: specifications
Также для Dell Inspiron 1320: Руководство по настройке и функциям (12 страниц), Паспорт безопасности продукта (6 страниц)
Печатать страницу
Back to Contents Page
Processor Fan
Dell™ Inspiron™ 1320 Service Manual
Removing the Processor Fan
Replacing the Processor Fan
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Processor Fan
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Remove the center control cover (see
4. Remove the keyboard (see
5. Remove the hard drive (see
6. Remove the palm rest (see
7. Disconnect the processor fan cable from the system board connector.
8. Remove the two screws that secure the processor fan to the processor heat sink assembly.
1
screws (2)
3
fan cable connector
9. Lift the processor fan, along with the cable, off the computer.
Replacing the Processor Fan
NOTE:
This procedure assumes that you have already removed the processor fan and are ready to replace it.
1. Place the processor fan on the processor heat sink assembly.
Begin.
Battery).
Removing the Center Control
Removing the
Keyboard).
Removing the Hard
Drive).
Removing the Palm
Rest).
2
processor fan
Removing the
Cover).
Battery) before working inside the