Dell Inspiron 1320 Руководство по эксплуатации - Страница 34

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ноутбук Dell Inspiron 1320. Dell Inspiron 1320 46 страниц. Dell inspiron inspiron 13: specifications
Также для Dell Inspiron 1320: Руководство по настройке и функциям (12 страниц), Паспорт безопасности продукта (6 страниц)

Dell Inspiron 1320 Руководство по эксплуатации
Back to Contents Page
  Wireless Mini-Card
Dell™ Inspiron™ 1320 Service Manual 
  Removing the Mini-Card
  Replacing the Mini-Card
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
 
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
 
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 
is not covered by your warranty.
 
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
NOTE:
Dell does not guarantee compatibility or provide support for Mini-Cards from sources other than Dell.
If you ordered a wireless Mini-Card with your computer, the card is already installed.
Your computer supports one Mini-Card slot:
 one Half Mini-Card slot – for WLAN
l
NOTE:
Depending on the configuration of the computer when it was sold, the Mini-Card slot may not have a Mini-Card installed.
 Removing the Mini-Card
 
1. Follow the instructions in
Before You
 
2. Remove the battery (see
Removing the
 
3. Remove the module cover (see
 
4. Disconnect the antenna cables from the Mini-Card.
1
Mini-Card
2
3
antenna cables (2)
 
5. Remove the screw that secures the Mini-Card to the system board.
 
6. Lift the Mini-Card out of the system board connector.
Begin.
Battery).
Removing the Module
Cover).
screw
Removing the
Battery) before working inside the