Avtech AVD717ZC Краткое руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для DVR Avtech AVD717ZC. Avtech AVD717ZC 16 страниц. High-end series

‧ The host name is created. You will be connected to the corresponding IP address whenever you enter this hostname.

3.6.3 Dynamic IP －－－－ PPPOE

1) Build a Local Area Network (LAN) between DVR and PC/NB with network cable:

Your NB/PC and DVR must be under the same network domain to build the area network. Please change the IP

address of your PC/NB into 192.168.1.X (X can be the number between 1~255, except 10) and the subnet mask into

255.255.255.0 for communicate with the DVR.

Install the supplied AP software on your NB/PC. And then login the DVR with the supplied AP software for the

following default DVR settings.

‧ The DVR default IP address: 192.168.1.10

‧ The DVR default account / password: admin

‧ The DVR default port: 80

2) Set DVR network setting in "SYSTEM CONFIG" → "Network" of the supplied AP:

In the "SYSTEM CONFIG" → "Network" of the supplied AP, select the "PPPOE" in "IP TYPE" section. And then type

the "User Name" and "Password" obtained from your ISP. Press "APPLY" button to confirm the setting.

3) Set DVR DDNS setting in the "SYSTEM CONFIG" → "Network" → "DDNS" of the supplied AP software.

‧ DDNS: Choose "Enable".

‧ User Name: Type your DDNS account.

‧ Password: Type your DDNS password.

‧ Domain: Type the "Host Name" you applied previously (EX: securityanytime.dyndns.org).

‧ System Name: Choose the DDNS server where you applied the domain name (EX: dyndns).

After setting, please press "APPLY" button to confirm and finish the setting.

Page 9

QUICK INSTALLATION