Dell Inspiron N3010 Руководство по эксплуатации - Страница 47
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ноутбук Dell Inspiron N3010. Dell Inspiron N3010 49 страниц. Service manual
Также для Dell Inspiron N3010: Руководство по эксплуатации (49 страниц)
Печатать страницу
Back to Contents Page
VGA Connector Board
Dell™ Inspiron™ N3010 Service Manual
Removing the VGA Connector Board
Replacing the VGA Connector Board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the VGA Connector Board
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Remove the memory-module cover (see
4. Remove the memory module(s) (see
5. Remove the keyboard (see
6. Remove the palm rest assembly (see
7. Remove the display assembly (see
8. Remove the middle cover (see
9. Lift the connector latch and pull the pull-tab to disconnect the VGA connector cable from the connector on the system board.
10. Remove the two screws that secure the VGA connector board to the computer base.
1
screws (2)
2
3
VGA connector cable
11. Lift the VGA connector board off the computer base.
Replacing the VGA Connector Board
1. Follow the instructions in
Before You
Begin.
Battery).
Removing the Memory-Module
Removing the Memory
Module(s)).
Removing the
Keyboard).
Removing the Palm Rest
Removing the Display
Assembly).
Removing the Middle
Cover).
VGA connector board
Begin.
Removing the
Cover).
Assembly).
Battery) before working inside the