Dell Latitude 3000 Series Руководство по эксплуатации - Страница 13

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ноутбук Dell Latitude 3000 Series. Dell Latitude 3000 Series 43 страницы. 2-in-1
Также для Dell Latitude 3000 Series: Руководство по настройке (2 страниц), Руководство пользователя (9 страниц), Установка утилит и драйверов (4 страниц), Технические характеристики (6 страниц), Техническое руководство (45 страниц), Технические характеристики (2 страниц), Руководство по началу работы (28 страниц), Инструкции по установке (1 страниц), Краткое руководство по эксплуатации (2 страниц), Настройка и технические характеристики (21 страниц), Руководство (25 страниц)

Печатать страницу
Dell Latitude 3000 Series Руководство по эксплуатации
Ensure that the card is fully seated and that its bracket is within the card slot.
 
4. Secure the card bracket with the screw you removed in step 2.
 
5. Connect any cables that should be attached to the card.
For information about the card's cable connections, see the documentation for the card.
NOTICE:
Do not route card cables over or behind the cards. Cables routed over the cards can cause damage to the equipment.
 
6. If you installed a sound card:
a.
 Enter system
setup, select Audio Controller, and then change the setting to Off.
b.  Connect external audio devices to the sound card's connectors. Do not connect external audio devices to the microphone, speaker/headphone,
or line-in connectors on the back panel.
 
7. If you installed an add-in network adapter and want to disable the integrated network adapter:
a.  Enter system setup, select Network Controller, and then change the setting to Off.
b.  Connect the network cable to the add-in network adapter's connectors. Do not connect the network cable to the integrated connector on the
back panel.
 
8. Install any drivers required for the card as described in the card documentation.
 

Removing a PCI Card

 
1. Follow the procedures in
Before You
 
2. If necessary, disconnect any cables connected to the card.
 
3. Remove the securing screw from the card bracket.
 
4. Grasp the card by its top corners, and ease it out of its connector.
 
5. If you are removing the card permanently, install a filler bracket in the empty card-slot opening.
Begin.