Avtech AVX920 Инструкции - Страница 2
Просмотреть онлайн или скачать pdf Инструкции для Медиаконвертер Avtech AVX920. Avtech AVX920 3 страницы. Hd cctv total solution tvi converter
Печатать страницуOVERVIEW
This device is designed to convert the TVI video signals to normal CCTV signals, allowing an installer to use his
CCTV tester monitor for angle and focus adjustment during camera installation.
PACKAGE CONTENT
TVI Converter
USB power cable
HARDWARE
Power to
camera
Power to TVI
OUTPUT
camera
LED indicator
(Green)
LED indicator
(Red)
Camera video
TVI INPUT
input
Zoom to focus
Power to TVI
INPUT
converter
Camera video
VIDEO OUTPUT
output
User Manual
RCA-BNC cable
Press for 3 seconds to supply power (DC12V) to the connected TVI camera;
press again for 3 seconds to stop camera power supply.
Connect to a TVI camera with the supplied power cable for power supply.
Green light flashes for 3 times when this converter is connected to power;
the light flashes again when this converter is powered on.
Green light shows when a TVI camera is connected successfully; no light
shows when the camera is disconnected.
Red light flashes for 3 times when this converter is connected to power;
the light flashes again when this converter is powered on.
Red light shows when
connected camera; no light shows when the camera power is off.
Connect a TVI camera with the supplied RCA-BNC cable.
Note: This converter only supports 1080P TVI cameras.
Press to zoom into the top left corner for focus adjustment.
Connect to a mobile power bank with the supplied USB power cable for
power supply, or connect to a CCTV tester monitor for power supply if the
CCTV tester monitor supports.
This converter supports DC12V/1A and DC5V/2A power.
Connect to a CCTV tester monitor with the supplied RCA cable for angle and
focus adjustment.
RCA cable
Power cable
is pressed for 3 seconds to supply power to the