Dell Studio XPS 1640 Руководство по эксплуатации - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ноутбук Dell Studio XPS 1640. Dell Studio XPS 1640 49 страниц.
Печатать страницу
Back to Contents Page
AC Adapter Connector
Dell™ Studio XPS™ 1640 Service Manual
Removing the AC Adapter Connector
Replacing the AC Adapter Connector
CAUTION:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not
covered by your warranty.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the AC Adapter Connector
1. Follow the instructions in
Before You
2. Remove the display assembly (see
3. Remove the system board (see
4. Remove the screw that secures the AC adapter connector.
5. Remove the AC adapter cable from the routing guide.
6. Lift the connector and cable out of the computer base.
1 screw
2 AC adapter connector
3 AC adapter connector cable
Replacing the AC Adapter Connector
1. Place the AC adapter connector in the computer base.
2. Replace the screw that secures the AC adapter connector.
3. Route the AC adapter cable through the routing guide.
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
4. Replace the system board (see
5. Replace the display assembly (see
Begin.
Removing the Display
Assembly).
Removing the System
Board).
Replacing the System
Board).
Replacing the Display
Assembly).
Before Working Inside Your
Computer) before working inside the