Quick Start Guide
/
AER1600 Series
FIRST TIME SETUP WIZARD
When you log in to the local administration pages for
the first time, you will be automatically directed to the
First Time Setup Wizard, which will walk you through
basic steps to customize your Cradlepoint AER1600. You
have the ability to configure any of the following:
+
Administrator
+
Access Point Name
Password
(APN)
+
Time Zone
+
Modem Authentication
+
WiFi Network Name
+
Failure Check
+
Security Mode
If you are currently using the router's WiFi network,
you will need to reconnect your devices to the network
using the newly established wireless network name
and password.
To return to the First Time Setup Wizard after your
initial login, select 'System > System Control' on
the left navigation bar and First Time Setup in the
dropdown menu.
To restore the router to its factory default settings,
press and hold the RESET button on the side of
the device for ten seconds. Reset returns the login
password to the default password and resets all
configuration changes.
©Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
UPDATING NETCLOUD OS
Via NetCloud Manager
1.
Log in at
cradlepointecm.com
NetCloud Manager credentials.
2.
Navigate to the 'Groups' page.
3.
Select a group and click on the NetCloud OS
option in the top toolbar. In the dropdown
menu that opens, select the desired version.
Wait for NetCloud OS to load.
Via the Local Administration Pages
1.
Log into the local administration pages
(see page 4). You may have changed the
'Administration Password'.
2.
Select 'System > System Control > System
NetCloud OS'.
3.
If a new version is available, select 'Automatic
(Internet)'. Wait for NetCloud OS to load.
If you do not have an active Internet connection,
you may need to use the 'Manual NetCloud OS
Upload' option by downloading a new version
from the Cradlepoint Connect Portal to a local
device. Upload to the router on the System >
System Control > System NetCloud OS' page.
|
cradlepoint.com
ROUTER COMMUNICATION /
DATA USAGE
The factory default configuration of the router
using your
is set to communicate with Cradlepoint and
other resources at regular intervals to access the
latest NetCloud OS and modem updates, clock
synchronization (NTP), and NetCloud Manager
membership. Such communication may result
in data usage and applicable charges regardless
of whether the router uses a wired or wireless
Internet connection. To avoid such data usage
and potential charges, consult the following
Knowledge Base article:
http://knowledgebase.cradlepoint.com/articles/
support/router-communication-data-usage
5
Печатать страницу