Dell Vostro 1450 Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ноутбук Dell Vostro 1450. Dell Vostro 1450 48 страниц. Document
Также для Dell Vostro 1450: Информация о настройках и возможностях (9 страниц), Руководство по эксплуатации (48 страниц), Краткое руководство по эксплуатации (2 страниц)
Печатать страницу
Back to Contents Page
Before You Begin
Recommended Tools
Turning Off Your Computer
Before Working Inside Your Computer
This manual provides instructions for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that the
following conditions exist:
You have performed the steps in
l
You have read the safety information that shipped with your computer.
l
A component can be replaced or—if purchased separately—installed by performing the removal procedure in reverse order.
l
Recommended Tools
The instructions in this document may require the following tools:
Small flat screwdriver
l
Phillips screwdriver
l
Plastic scribe
l
Hex nut driver
l
BIOS upgrade CD or the BIOS executable update program available on the Dell Support website at support.dell.com
l
Turning Off Your Computer
CAUTION:
1. Save and close all open files and exit all open programs.
2. In Microsoft
The computer turns off after the operating system shutdown process finishes.
3. Ensure that the computer is turned off. If your computer did not automatically turn off when you shut down the operating system, press and hold the
power button until the computer turns off.
Before Working Inside Your Computer
Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your own personal safety.
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
mounting bracket. Hold a component such as a processor by its edges, not by its pins.
CAUTION:
is not covered by your warranty.
CAUTION:
tabs; if you are disconnecting this type of cable, press in on the locking tabs before you disconnect the cable. As you pull connectors apart, keep
them evenly aligned to avoid bending any connector pins. Also, before you connect a cable, ensure that both connectors are correctly oriented
and aligned.
CAUTION:
1. Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.
Great user manuals database on
Turning Off Your Computer
To avoid losing data, save and close all open files and exit all open programs before you turn off your computer.
®
®
Windows Vista
, click Start
, click the arrow
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
When you disconnect a cable, pull on its connector or on its pull-tab, not on the cable itself. Some cables have connectors with locking
To avoid damaging the computer, perform the following steps before you begin working inside the computer.
UserManuals.info
and
Before Working Inside Your
Computer.
, and then click Shut Down.