DH Gibralter GE-MINI Руководство по установке - Страница 6

Просмотреть онлайн или скачать pdf Руководство по установке для Антенна DH Gibralter GE-MINI. DH Gibralter GE-MINI 10 страниц.

Assemble Ring to Base Stand

You will have to assemble the 39" ring to the Ge-Mini base. Look at the

photo of the mount in photo Fig. #3, you will notice that the top of the

mount has a bracket to attach the elevation arm. The bottom of the 2"

framework has two tabs. Insert a ½"x ¾" x ½" long brass bushing (found in

the bolt bag) into each of the tabs. Place the ring on the base stand, inserting

the tabs (with the bushing) into the double ear tabs. Secure with ½" x 2 ½"

bolt, ½" lock washer & nut. Next install the elevation actuator. Attach the

gimball actuator clamp to the right side rear of the 2" square tube with a ½"

x 4 ½" bolt. Then take the eyebolt on the end of the actuator and put it in

between the top bracket of the frame work of the ring. Use a ½" x 2" bolt

and use a lock washer and nut to secure it in place. This elevation actuator

will be used to precisely aim the dish to the satellite you are using.

Fig. #3

(for the 2.4m & 2.7m)

Please see the parts listed supplied to

help identify all parts for both the

Dual Powered Ge-Mini and the Fixed

Az-El Ge-mini. You will find these

drawings on the previous pages of

this instruction manual. Note the

Fixed Az-El Ge-Mini does not

include the motors or gears and

drives. These parts are only used for

the Dual Powered Ge-mini.

PAGE 6