Dell Vostro 3500 Руководство по настройке и техническим характеристикам - Страница 32
Просмотреть онлайн или скачать pdf Руководство по настройке и техническим характеристикам для Ноутбук Dell Vostro 3500. Dell Vostro 3500 40 страниц. Dell vostro 3300: install guide
Также для Dell Vostro 3500: Информация о настройках и возможностях (12 страниц), Руководство по настройке и техническим характеристикам (23 страниц)
Печатать страницу
Table 31. Passwords (continued)
Option
Password Bypass
Password Changes
Admin Setup Lockout
Master Password
Lockout
Secure Boot
Table 32. Secure Boot
Option
Secure Boot
Secure Boot Mode
32
System setup
Description
Minimum
Defines the number of characters allowed for a password. Min = 4
Characters
Allows you to bypass the System password and the Internal hard drive password, when it is set,
during a system restart.
The options are:
● Disabled—This option is enabled by default.
● Reboot bypass
Allows you to change the system password and hard drive password without the need of
administrator password.
Enable Non-Admin Password Changes - By default, this option is disabled.
Allows the administrator to control how the user can access BIOS setup.
Enable Admin Setup Lockout - By default, this option is disabled.
NOTE:
● If the admin password is set and Enable Admin Setup Lockoutis enabled, you cannot
view the BIOS setup (using F2 or F12) without the admin password.
● If the admin password is set and Enable Admin Setup Lockoutis disabled, the BIOS
setup can be entered and items that are viewed in Locked mode.
Allows you to disable master password support.
Enable Master Password Lockout - By default, this option is disabled.
NOTE:
The Hard Disk password has to be cleared before the settings can be changed.
Description
Secure Boot helps ensure the system boots using only
validated boot software.
Enable Secure Boot—By default, this option is disabled.
NOTE:
The system has to be in UEFI boot mode to enable
Enable Secure Boot.
Changes to the Secure Boot operation mode modifies the
behavior of Secure Boot to allow evaluation of UEFI driver
signatures.
The options are:
● Deployed Mode—By default, this option is enabled.
● Audit Mode