Dell Vostro 3580 Руководство по настройке и техническим характеристикам - Страница 24
Просмотреть онлайн или скачать pdf Руководство по настройке и техническим характеристикам для Ноутбук Dell Vostro 3580. Dell Vostro 3580 35 страниц.
Печатать страницу
System information
Table 26. System Configuration
Option
Integrated NIC
SATA Operation
Drives
Smart Reporting
USB Configuration
Audio
Miscellaneous Devices
Video
Option
Description
LCD Brightness
Allows you to set the display brightness depending up on the power source—On Battery and On AC. The LCD
brightness is independent for battery and AC adapter. It can be set using the slider.
NOTE:
The video setting is visible only when a video card is installed into the system.
24
System setup
Description
Allows you to configure the on-board LAN controller.
•
Disabled = The internal LAN is off and not visible to the operating system.
•
Enabled = The internal LAN is enabled.
•
Enabled w/PXE = The internal LAN is enabled (with PXE boot) (selected by default)
Allows you to configure the operating mode of the integrated hard drive controller.
•
Disabled = The SATA controllers are hidden
•
AHCI = SATA is configured for AHCI mode
•
RAID ON = SATA is configured to support RAID mode (selected by default)
Allows you to enable or disable the various drives on-board:
•
SATA-0 (enabled by default)
•
SATA-1 (enabled by default)
•
SATA-2 (enabled by default)
•
M.2 PCIe SSD-0 (enabled by default)
This field controls whether hard drive errors for integrated drives are reported during system startup.
The Enable Smart Reporting option is disabled by default.
Allows you to enable or disable the integrated USB controller for:
•
Enable USB Boot Support
•
Enable External USB Port
All the options are enabled by default.
Allows you to enable or disable the integrated audio controller. The option Enable Audio is selected by
default.
•
Enable Microphone
•
Enable Internal Speaker
Both the options are selected by default.
Allows you to enable or disable the following devices:
•
Enable Camera (enabled by default)