DH AZ-EL Руководство по установке

Просмотреть онлайн или скачать pdf Руководство по установке для Стойки и подставки DH AZ-EL. DH AZ-EL 20 страниц.

CRITICAL FACTORS

INSTALLING A DH ANTENNA

1. READ INSTRUCTIONS before disassembling the crate.

2. RIBS: Look for color coded dot on the rib. Dots indicate correct order

to assemble panels. Number is stamped in the lip of the antenna too.

3. PILOT HOLE: Locate pilot hole on the ring and antenna. THIS IS

YOUR STARTING POINT! Pilot hole is located on the 2

block from

the left of the weld on the ring from the back view of the antenna.

MATCH mount pilot hole to panel with pilot hole.

4. FINGER TIGHT: Installing the panels to the ring and installing the

ribs on the panel sections. DO NOT OVERTIGHTEN.

5. TIGHTEN DOWN all ribs to become a solid antenna.

(Once all panels installed)

6. STRING THE ANTENNA. Strings should just touch. Adjust the

braces so front surface is exactly flat.

7. TIGHTEN DOWN ALL BOLTS: Ring to antenna.

8. SET FEEDHORN TO EXACT FOCAL LENGTH & TO EXACT

CENTER OF THE ANTENNA. Use a laser tool or cut a piece of wood

to the focal length of your antenna. Feedhorn must be flat to antenna

surface. Please consider feedhorn manufacturer's recommendation. See

"Preparing the Feed Assembly" in manual.

CALL 1-608-326-8406 WITH QUESTIONS