Dell Vostro A180 Руководство по эксплуатации - Страница 20

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ноутбук Dell Vostro A180. Dell Vostro A180 31 страница.

7. Lift the system board away from the chassis.

NOTICE:

If you are replacing the system board, visually compare the replacement system board to the existing system board to ensure that you

have the correct part.

NOTE:

Some components and connectors on replacement system boards may be in different locations than corresponding connectors on the existing

system board.

NOTE:

Jumper settings on replacement system boards are preset at the factory.

8. Align the screw holes on the system board with the screw holes on the chassis.

9. Replace the screws that secure the system board to the chassis.

10. Connect the cables that you removed from the system board.

11. If applicable, replace the processor (see Replacing the Processor (Dell™ Vostro™ A180 only)).

NOTICE:

Ensure that the heat sink assembly is correctly seated and secure.

12. Replace the memory modules into the memory module connectors at the same locations from which you removed them (see

(s)).

13. Replace any add-in cards on the system board.

14. Replace the computer cover (see

15. Connect your computer and devices to an electrical outlet, and turn them on.

16. Flash the system BIOS, as needed.

NOTE:

For information on flashing the system BIOS, see

Back to Contents Page

Replacing the Computer

Cover).

Flashing the

BIOS.

Replacing Memory Module