Dell Vostro A90 Руководство по эксплуатации - Страница 35
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Ноутбук Dell Vostro A90. Dell Vostro A90 38 страниц. Dell desktop computer quick start guide
Также для Dell Vostro A90: Краткое руководство по эксплуатации (19 страниц)
Печатать страницу
1. Remove the centrifugal paper of the thermal pads that shipped with your new system board and paste it on the processor, North Bridge, and South
Bridge.
1
thermal pad (3)
3
north bridge
2. Follow all the steps in
Removing the System Board
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
3. Turn on the computer.
NOTE:
After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.
4. Insert the CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear on the screen.
5. The keyboard matrix may change after you replace the system board. To set the keyboard matrix according to your country, see
Matrix.
Setting the Keyboard Matrix
1. Turn off your computer (see
2. If your computer is connected to the AC adapter, disconnect the AC adapter from the computer.
3. Press and hold the following key combination for the desired keyboard matrix:-
United States: <Fn><S>
¡
United Kingdom: <Fn><K>
¡
Japan: <Fn><J>
¡
Korea: <Fn><E>
¡
4. Connect the AC adapter to the computer and then plug it into a wall outlet or surge protector.
5. Release the key combination.
Updating Service Tag
The system board's BIOS chip contains the service tag, which is also visible on a barcode label on the bottom of the computer.
Follow these instructions to enter the service tag:
Manually -
1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
2
south bridge
4
processor
in reverse order.
Turning Off Your
Computer).
Setting the Keyboard