Allied Telesis Rapier Series Как сделать - Страница 2

Просмотреть онлайн или скачать pdf Как сделать для Сетевое оборудование Allied Telesis Rapier Series. Allied Telesis Rapier Series 8 страниц. How to set up pppoe between a linux client and access concentrator
Также для Allied Telesis Rapier Series: Руководство по устранению неполадок (8 страниц), Устранение неполадок (5 страниц), Примечание к выпуску (8 страниц), Как настроить (9 страниц)

Configuring your Allied Telesis Device

Before starting, ensure that your PC has a version of rp-pppoe.

If rp-pppoe isn't on your PC, do one of the following;

•

Download it from

compile and install it.

•

Use the prepackaged installer, for example RPM or deb.

add user=linux_client pass=password

set user=linux_client telnet=no ipaddr=192.168.0.1

# PPP templates configuration

create ppp template=1

set ppp template=1 bap=off authentication=chap

# PPP configuration

add ppp acservice=test template=1 vlan=1

ena ppp accessconcentrator

# IP configuration

enable ip

add ip int=vlan1 ip=192.168.0.254

Network diagram

Linux PC (client)

Set Up PPPoE Between a Linux Client and an Allied Telesis Access Concentrator

http://www.roaringpenguin.com/penguin/open_source_rp-pppoe.php

Configure your Allied Telesis device as follows:

netmask=255.255.255.255

eth 1

port 1

Allied Telesis switch

(Access Concentrator)

, then