Cradlepoint COR IBR600 Руководство по установке - Страница 8
Просмотреть онлайн или скачать pdf Руководство по установке для Беспроводной маршрутизатор Cradlepoint COR IBR600. Cradlepoint COR IBR600 9 страниц. Integrated broadband router
Также для Cradlepoint COR IBR600: Краткое руководство по эксплуатации (2 страниц), Краткое руководство по эксплуатации (2 страниц), Руководство по установке (12 страниц)
Печатать страницу
White Paper
/
COR IBR600 Vehicle Installation Guide
+
Isolation between devices is recommended.
Noise generated by one device can affect
another. If multiple devices are connected
at the same distribution point it may be
necessary to filter each device separately.
+
For proper and safe installation, the router
must be connected to a fused circuit in
the vehicle. For the COR IBR600 this fused
circuit requires a 1.5 A maximum time delay
(slow blow) high interrupting rating fuse. If
the supply connection is made directly to
the battery, the fuse should be installed in
the positive lead. For North America, a UL
Listed fuse is to be used.
10–16 V (12 V system)
17–32 V (24 V system)
Long Cables Use
correct wire size
+
-
Battery
12 V / 24 V
Fig 5. Possible Installation Configuration
13.6 VDC
12 V IN
IN
OUT
DC-DC
Converter
IGNITION SW
GND
No connection
if converter is
ISOLATED
Ignition
Switch
©2017 Cradlepoint. All Rights Reserved.
AMPS
3–10
11–20
21–35
Filter
12 V OUT
Power Management
GROUND
Fused Distribution
Block
Cable Length (AWG)
10'
20'
#14
#12
#14
#10
#8
#6
Keep
cables
short
|
+1.855.813.3385
|
cradlepoint.com
8