2Wire i38HG Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Модем 2Wire i38HG. 2Wire i38HG 20 страниц.

Печатать страницу

1. I3812V

iNID -- i3812V User Guide

Note:

The battery provides power for voice over IP services during a power

outage. You are responsible to monitor and replace the battery when needed.

Your service provide does not monitor the battery and is not responsible for

its replacement.

Table 2: Power Supply Unit Indicators and Buttons

Indicators and

Buttons

Description

Reset — Button

surrounding red circle. When pressed for up to 9 seconds, the

reboots the outside unit. If the button is pressed for 10 or more seconds, it resets

the outside unit to the factory default settings.

Note:

may reset the outside unit to the factory default settings -- that means you will

lose your personal settings.

POWER

•

SILENCE ALARM —

The

Button

•

BATTERY

•

Note:

and communicates with the i3812V.

button is located on the upper left side panel, identifiable by a

Reset

Do not press the

Reset

Solid green indicates that the power supply is running on AC power.

Off indicates that the power supply is not receiving power from either AC or

the battery.

Flashing red indicates that the power is provided by the backup battery or that

the outside unit is not yet communicating with the iPSU.

button is located between

SILENCE ALARM

If AC power is interrupted for any reasons, a continuous tone indicates that

the power supply is running on the backup battery. Pressing the

button within 15 seconds immediately silences the audio alert. (The

ALARM

tone stops automatically after 15 seconds.)

When the battery needs replacing, a chirp sounds intermittently unless you

press the button to silence it for 12 hours. The chirp resumes after 12 hours

if the battery is not replaced.

Solid green indicates that the battery is installed and functioning properly.

Off indicates that no battery is installed.

Flashing red indicates that the battery needs to be replaced.

The

indicator works properly only when the iPSU is connected to

BATTERY

button unless you are instructed to do so. Doing so

POWER

button

Reset

and

indicators.

BATTERY

SILENCE