Dell EMC PowerEdge MX740c Справочное руководство - Страница 15

Просмотреть онлайн или скачать pdf Справочное руководство для Сервер Dell EMC PowerEdge MX740c. Dell EMC PowerEdge MX740c 29 страниц. Bios and uefi

Changing boot order

About this task

You may have to change the boot order if you want to boot from a USB key or an optical drive. The following instructions may

vary if you have selected BIOS for Boot Mode.

Steps

1. On the System Setup Main Menu screen, click System BIOS > Boot Settings > UEFI/BIOS Boot Settings > UEFI/

BIOS Boot Sequence.

2. Use the arrow keys to select a boot device, and use the plus (+) and minus (-) sign keys to move the device down or up in

the order.

3. Click Exit, and then click Yes to save the settings on exit.

Network Settings

You can use the Network Settings screen to modify UEFI PXE, iSCSI, and HTTP boot settings. The network settings option is

available only in the UEFI mode.

NOTE:

The BIOS does not control network settings in the BIOS mode. For the BIOS boot mode, the optional Boot ROM of

the network controllers handles the network settings.

Viewing Network Settings

To view the Network Settings screen, perform the following steps:

Steps

1. Turn on, or restart your system.

2. Press F2 immediately after you see the following message:

F2 = System Setup

NOTE:

If your operating system begins to load before you press F2, wait for the system to finish booting, and then

restart your system and try again.

3. On the System Setup Main Menu screen, click System BIOS.

4. On the System BIOS screen, click Network Settings.

Network Settings screen details

The Network Settings screen details are explained as follows:

About this task

Option

Description

UEFI PXE

Enables you to control the configuration of the UEFI PXE device.

Settings

PXE Device n (n

Enables or disables the device. When enabled, a UEFI PXE boot option is created for the device.

= 1 to 4)

PXE Device n

Enables you to control the configuration of the PXE device.

Settings(n = 1 to

UEFI HTTP

Enables or disables the device. When enabled, a UEFI HTTP boot option is created for the device.

Settings

Pre-operating system management applications