Dell EMC PowerEdge R550 Справочное руководство - Страница 10
Просмотреть онлайн или скачать pdf Справочное руководство для Сервер Dell EMC PowerEdge R550. Dell EMC PowerEdge R550 25 страниц.
Печатать страницуTable 5. Processor Settings details (continued)
Option
CPU Physical Address Limit
Number of Cores per Processor
Processor Core Speed
Processor Bus Speed
Local Machine Check Exception
Processor nProcessor 1
Table 6. Processor details
Option
Family-Model-Stepping
Brand
Level 2 Cache
Level 3 Cache
Number of Cores
Maximum Memory Capacity
Microcode
10
Pre-operating system management applications
Description
Management option is disabled. This option is set to Auto by
default.
Enables or disables the CPU Physical Address Limit option.
When set to Enabled,it disables Multiple Keys Memory
Encryption and sets the physical memory address to 46 bits
to support older Hyper-v (MKTME). When set to Disabled,
the physical memory address is set to 52 bits to enable 5-
level paging, the system will crash at the driver verifier DMA
violation blue screen when booting with non-5-level paging-
supporting operating systems (Windows 2019 and, 2016 etc.)
This option is set to Enabled by default.
Controls the number of enabled cores in each processor. This
option is set to All by default.
NOTE:
This setting restores to default when user changes
System Profile or CPU Power Management setting of
Profile Settings.
Specifies the maximum core frequency of the processor.
Specifies the bus speed of the processor.
NOTE:
The processor bus speed option displays only
when both processors are installed.
Enables or disables the local machine check exception. This
is an extension of the MCA Recovery mechanism providing
the capability to deliver Uncorrected Recoverable (UCR)
Software Recoverable Action Required (SRAR) errors to
one or more specific logical processors threads receiving
previously poisoned or corrupted data. When enabled, the
UCR SRAR Machine Check Exception is delivered only to the
affected thread rather than broadcast to all threads in the
system. The feature supports operating system recovery for
cases of multiple recoverable faults that are detected close,
which would otherwise result in a fatal machine check event.
The feature is available only on Advanced RAS processors.
This option is set to Disabled by default.
NOTE:
Depending on the number of processors, there
might be up to n processors listed.
The following settings are displayed for each processor:
Description
Specifies the family, model, and stepping of the processor as
defined by Intel.
Specifies the brand name.
Specifies the total L2 cache.
Specifies the total L3 cache.
Specifies the number of cores per processor.
Specifies the maximum memory capacity per processor.
Specifies the processor microcode version.