Dell EMC VxFlex Ready Node 14G Краткое руководство по эксплуатации - Страница 15
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сервер Dell EMC VxFlex Ready Node 14G. Dell EMC VxFlex Ready Node 14G 22 страницы.
Также для Dell EMC VxFlex Ready Node 14G: Руководство по инспекции (8 страниц)
Печатать страницу
Installing SDC on a Linux server and connecting it to VxFlex OS
Procedure
1. On the ESX on which you are installing the SDC, set the acceptance level:
esxcli --server=<SERVER_NAME> software acceptance set --
level=PartnerSupported
<SERVER_NAME> is the ESX on which you are installing the SDC.
where
2. Install the SDC:
esxcli software vib update –d "Full Path"
3. Set the IP address of the MDM:
esxcli system module parameters set -m scini -p
"IoctlIniGuidStr=<XXXXXX> IoctlMdmIPStr=<LIST_VIP_MDM_IPS>"
where
<LIST_VIP_MDM_IPS> is a comma-separated list of the MDM IP addresses
l
or the virtual IP address of the MDM
<XXXXXX> is the version
l
Results
The SDC is installed on the ESX server and is connected to VxFlex OS.
Install the SDC with the appropriate parameters to connect it to an existing VxFlex OS
system.
Before you begin
Ensure that you have:
The virtual IP address or MDM IP address of the existing system
l
Login credentials for the SDC
l
The appropriate installation packages for the SDC
l
The following procedure describes manually installing an external SDC on a Linux
server. On most servers (with the exception of hLinux), you can install the external
SDC using the VxFlex OS Installation Manager. For more information, see "Extending
an existing VxFlex OS system" in the VxFlex OS Deployment Guide .
Note
External SDC on RHEL 7.4 is supported on bare-metal servers only, not as guests on a
hypervisor.
Procedure
1. Install the SDC:
RHEL/CentOS /Oracle Linux
l
MDM_IP=<LIST_VIP_MDM_IPS> rpm -i <SDC_PATH>.rpm
Installing SDC on a Linux server and connecting it to VxFlex OS
Deploying VxFlex OS in a 2-Layer Environment
15