Dell EMC VxFlex Ready Node 14G Краткое руководство по эксплуатации - Страница 18
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Сервер Dell EMC VxFlex Ready Node 14G. Dell EMC VxFlex Ready Node 14G 22 страницы.
Также для Dell EMC VxFlex Ready Node 14G: Руководство по инспекции (8 страниц)
Печатать страницу
Quick Start Guide
Log in to the VxFlex OS GUI
Retrieve device paths in a Linux server
VxFlex Ready Node Quick Start Guide
18
After you finish
To log in to the VxFlex OS GUI, see "Log in to the VxFlex OS GUI."
Open and log in to the VxFlex OS GUI.
Before you begin
Ensure that:
The VxFlex OS GUI software is installed on the workstation. To install the VxFlex
l
OS GUI, see "Install the VxFlex OS GUI."
You have these credentials (available from the administrator):
l
MDM management IP address or hostname
n
Username (default: admin)
n
Password (defined during deployment)
n
Procedure
1. Open the VxFlex OS GUI by selecting Start
GUI.
The initial login screen is displayed.
2. Type the IP address or hostname and click Connect.
If a certificate notice is displayed, review and accept the certificate.
If a login banner is displayed, confirm it to continue.
3. In the login screen, type the username and password, and click Login.
Results
The VxFlex OS GUI is displayed.
After you finish
Users and passwords are configured with the VxFlex OS CLI. For more information,
see the "Security" chapter of the VxFlex OS Ready Node User Guide .
The manner of retrieving device paths in a Linux-based VxFlex Ready Node server
differs, depending on the type of controller card in the node.
Proceed to the section that matches your configuration:
Retrieve device paths in a Linux server with an HBA330 controller
l
Retrieving device paths in a Linux server with an H730p/H740p controller
l
19
Retrieving device paths in a Linux server with NVME devices configured
l
20
All Programs
EMC
>
>
>
on page 19
VxFlex OS
on page
on page