DH Lifelabs Sciaire Storm HD110 Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Очиститель воздуха DH Lifelabs Sciaire Storm HD110. DH Lifelabs Sciaire Storm HD110 14 страниц.

Печатать страницу

Remove Front Cover

Use the anti-theft wrench

to loosen the anti-theft

screw in the bottom part.

Security Screw

Remove Filters

Activated Carbon Filter

Take out the activated

carbon filter and remove any

protective packaging.

Install Gromet & Small Bracket

Trim the gromet to a moderate

size. Install the trimmed gromet

to the small bracket.

Attach Protection Bracket to Device

With the back of the

device facing up, install the

protection bracket. Snap the

buckles on the protection

bracket to the slots on the

back of the device.until there

is no sense of wobble. At this

point, installation of this part

is complete, as shown in the

figure above.

Slots

Lift the bottom up and

gently push up to remove

the complete cover.

HEPA Filter

Take out the HEPA filter

and remove any protective

packaging.

Install the protruding side of

it into the power cable hole

on the back of the device.

Install the unit with the

tapping screws to fix it.

Protection Bracket

Buckles

Install the HEPA & AC filters

Tear off the

package of the

HEPA filter and

insert it to the unit.

Remove Power Supply Cover

Power Supply Cover

Loosen the screw on the

cover of the power supply

unit and take off the cover.

Secure Device to ADA Compliance Kit

Insert the bottom of the

protection bracket into the

slots at the bottom of the

ADA compliance kit.

Insert AC filter into the

unit box, then insert the

unit box into the device.

Attach the chain included with

the ADA compliance kit to the

top rear slot of the protection

bracket of the device.