Dell Force10 MXL Blade Руководство по началу работы - Страница 25

Просмотреть онлайн или скачать pdf Руководство по началу работы для Сервер Dell Force10 MXL Blade. Dell Force10 MXL Blade 38 страниц. 10/40gbe blade switches
Также для Dell Force10 MXL Blade: Примечание по применению (6 страниц), Технические характеристики (2 страниц), Руководство (27 страниц)

Assembling a Switch Stack

After you complete the initial switch configuration, the MXL 10/40GbE

Switch is powered up and operational. Stacking is supported on the 40GbE

ports on the base module or a 2-Port 40GbE QSFP+ module to connect up

to six MXL 10/40GbE Switches in a single stack.

Figure 1-9 shows an example using six MXL 10/40GbE Switches in a chassis.

The MXL 10/40GbE Switches are connected to operate as a single stack in a

ring topology using only the 40GbE ports on the base modules. You can use

the 40GbE ports on the base module and plug-in modules to create a stack in

either a ring or daisy-chain topology.

NOTE:

All MXL 10/40GbE Switches in the stack should be powered up with the

initial configuration before you attach the cables.

Figure 1-9. Six Stacked MXL 10/40GbE Switches

Assembling a Switch Stack