Dell M3S2G8 Руководство по началу работы - Страница 16

Просмотреть онлайн или скачать pdf Руководство по началу работы для Сервер Dell M3S2G8. Dell M3S2G8 32 страницы. Servers for sap hana

4. Check remote access to the Hardware Console:

a. If the mainboard Ethernet port is connected to a computer for local configuration, connect it to the LAN.

b. Open a Web browser and enter the IP address that has just been configured. If the Hardware Console is accessed

correctly, the Authentication page opens.

Test LAN connections

About this task

Use a remote workstation that is connected to the same network to test the LAN connections with the ping command.

Steps

1. Click Start > Run and type cmd to open a command window.

2. Enter ping <IP_address>, where <IP_address> is the IP address of the server that has just been configured with the

psetup (Windows) tool or mc-setup (Linux) tool.

Steps

1. Open a shell command window.

2. Enter ping <IP_address>, where <IP_address> is the IP address of the server that has just been configured with the

psetup (Windows) tool or mc-setup (Linux) tool.

About this task

For each server module, perform the following steps:

Steps

1. Press the power button on the MRB.

Figure 16. Power button - front view

2. After a few seconds, check that the LED on the power button is on and green.

Connecting the Server