Dell PowerEdge 4x00 Series Руководство по установке - Страница 10
Просмотреть онлайн или скачать pdf Руководство по установке для Сервер Dell PowerEdge 4x00 Series. Dell PowerEdge 4x00 Series 28 страниц. Rack installation guide
Также для Dell PowerEdge 4x00 Series: Установка стойки (37 страниц), Руководство пользователя (42 страниц), Установка стойки (34 страниц), Руководство по установке (37 страниц)
1-4
Dell PowerEdge 4x00 and 6300 Systems Tower Installation Guide
Removing the Doors From a 24-U or 42-U Rack
You must remove the doors from the rack to provide access to the interior of the
rack and to prevent damage to the doors while installing the kit. To remove the doors,
perform the following steps.
CAUTION: To prevent personal injury due to the size and weight of the
doors, never attempt to remove the doors by yourself.
1.
Open the latch on the front door (see Figure 1-2).
Slide the latch's push-button cover up as far as it will go, press the push button,
rotate the handle clockwise until the latch releases, and then pull the door open.
Figure 1-2. Opening the Latch on the Door
2.
Remove the front door of the rack.
If you have a 42-unit (U [1.75 inches]) rack, perform the following steps
(see Figure 1-3):
a.
One person should grasp the top of the door to stabilize it. The other person
should grasp the bottom of the door.
b.
The person holding the bottom of the door should press the release lever on
the bottom hinge and then pull the bottom of the door away from the rack a
few inches.
c.
The person holding the top of the door should press the release lever on the
top hinge and then pull the door away from the rack.
push-button
cover
push button
handle