Dell PowerEdge 5160 Руководство по установке - Страница 7

Просмотреть онлайн или скачать pdf Руководство по установке для Сервер Dell PowerEdge 5160. Dell PowerEdge 5160 42 страницы. Installing the external drive bay
Также для Dell PowerEdge 5160: Руководство по установке (20 страниц), Руководство по установке (28 страниц), Руководство по обновлению (8 страниц), Обновление информации (8 страниц), Руководство пользователя (42 страниц), Установка стойки (34 страниц), Руководство по установке оборудования (40 страниц), Руководство по установке (36 страниц)

(Rev. 11/3/98) FILE LOCATION: S:\SYSTEMS\opal\ts\Romb\8648Reb0.fm

support.dell.com

DIMM socket

ejectors (2)

alignment

keys (2)

Figure 1-2. Installing a DIMM

Align the RAID DIMM's edge connector with the slot in the center of the DIMM

socket, and insert the DIMM in the socket (see step A in Figure 1-2).

The DIMM socket has two alignment keys that allow the DIMM to be installed in

the socket in only one way.

NOTE: The RAID controller DIMM must be an unbuffered DIMM, rated to run at

100 megahertz (MHz) or faster. Do not substitute registered DIMMs such as

those used for system memory.

Press down on the DIMM with your thumbs while pulling up on the ejectors with

your index fingers to lock the DIMM into the socket (see step B in Figure 1-2).

7 .

Install the RAID hardware key.

Insert the hardware key into the socket (see Figure 1-1) and secure the key with

the latches on each end of the socket (see Figure 1-3). The key is designed so

that you can only insert it one way and is labeled "PE4400."

DELL CONFIDENTIAL - Preliminary

1/14/00

Dell PowerEdge 4400 Systems—Activating the PERC 3/Di

1-3