Dell POWEREDGE Cluster FE655WI Руководство по эксплуатации платформы - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации платформы для Сервер Dell POWEREDGE Cluster FE655WI. Dell POWEREDGE Cluster FE655WI 10 страниц. Dell server user manual

Печатать страницу

Rules and Guidelines

The rules and guidelines described in Table 1-2 apply to direct-attached clusters.

Table 1-2. Direct-Attached Clusters Rules and Guidelines

Rule/Guideline

Operating system

Windows Server 2003

service pack

Windows Server 2003,

x64 service pack

Primary storage

iSCSI Initiator

iSCSI Initiator version

NICs for iSCSI traffic

TOE NICs for iSCSI traffic

NIC driver version

SNP

Ethernet modules

Dell|EMC AX150SCi and

AX150i core software (EMC

FLARE

)

Dell|EMC CX3-10c, CX3-20c

and, CX3-40c core software

Platform Guide

Description

Each direct-attached cluster must run Windows Server 2003 or Windows Server

2003, x64 operating system.

Windows Server 2003 is supported with all CX-series and AX-series storage

systems. See "Dell Cluster Configuration Support Matrix" on page 10 for the

supported versions.

Windows Server 2003, x64 is supported with CX-series storage systems only. See

"Dell Cluster Configuration Support Matrix" on page 10 for the supported versions.

Only one storage system (AX150i, AX150SCi, CX3-10c, CX3-20c, or CX3-40c) can

be directly attached to the cluster.

NOTE:

The PowerEdge cluster FE655Wi solution does not support Windows Server 2003,

x64 with the Dell|EMC AX-series storage systems.

Each Windows Server 2003 or Windows Server 2003 x64 cluster can support up to

22 unique drive letters for shared logical drives and additional physical drives

through mount points.

Microsoft iSCSI Software Initiator

See "Dell Cluster Configuration Support Matrix" on page 10 for the supported

versions.

Ethernet daughter cards: Intel PRO/1000 MB dual-port server adapter for

PowerEdge 1855 systems only.

Ethernet daughter card: Broadcom 5708 Gigabit dual-port NIC controller for

PowerEdge 1955 systems only.

See "Dell Cluster Configuration Support Matrix" on page 10 for the supported

versions.

Microsoft Scalable Networking Pack (SNP) required to enable TOE capability on

the PowerEdge 1955 systems.

Two Gigabit Ethernet pass-through modules.

See "Dell Cluster Configuration Support Matrix" on page 10 for the supported

versions.

See "Dell Cluster Configuration Support Matrix" on page 10 for the supported

versions.