Dell PowerEdge External Media System 1434 Руководство - Страница 10

Просмотреть онлайн или скачать pdf Руководство для Сервер Dell PowerEdge External Media System 1434. Dell PowerEdge External Media System 1434 29 страниц. Statement of volatility
Также для Dell PowerEdge External Media System 1434: Руководство по началу работы (12 страниц), Руководство (38 страниц), Использование руководства (16 страниц), Конфигурация (16 страниц), Руководство (10 страниц)

Updating BIOS on Dell 12G PowerEdge Servers

3. Follow the remaining prompts to perform the update.

4. The system will reboot and launch Lifecycle Controller (Figure 3).

5. The Lifecycle Controller will invoke the BIOS update (Figure 4). This may take a few minutes.

After the BIOS is updated, a system reboot will automatically take place and boot back to the

host operating system.

DOS-based BIOS Flash Utility

The DOS or DRMK (Dell Real Mode Kernel)-based BIOS flash utility for each platform can also be found

at the Dell support website. Note that you must have DOS bootable media, such as a USB key. To

update the BIOS using this utility, perform the following steps:

1. Browse to the location where you downloaded the file.

2. Update the name of the file to DOS-recognizable format (8.3). If you do not update the

filename to 8.3 format, the file name will be truncated to 8.3 format.

3. For more information on the 8.3 format, refer to http://en.wikipedia.org/wiki/8.3_filename.

Figure 5.

Linux DUP