Dell PowerEdge M610 Руководство по началу работы - Страница 6

Просмотреть онлайн или скачать pdf Руководство по началу работы для Сервер Dell PowerEdge M610. Dell PowerEdge M610 12 страниц. Dell poweredge blade servers getting started guide
Также для Dell PowerEdge M610: Обновление информации (38 страниц), Руководство по обновлению (44 страниц), Руководство по обновлению (21 страниц), Руководство по обновлению (14 страниц), Руководство по установке (7 страниц), Руководство по началу работы (12 страниц), Техническое руководство (45 страниц), Руководство по портфолио (27 страниц), Руководство по началу работы (14 страниц), Руководство по началу работы (12 страниц)

Connecting The System To Power

Figure 6. Connecting Power to the System

Connect the system's power cables to the system power supplies.

CAUTION: To prevent the power cables from being disconnected accidentally, use the plastic clip on each power

supply to secure the power cable to the power supply, and use the strap to secure the power cable to the strain-

relief bar.

CAUTION: Do not plug the power cables directly into a power outlet; you must use a PDU. For optimal system

functionality, a minimum of three power supplies are required.

Plug the other end of the power cables into a power distribution unit (PDU).

NOTE: The power supply units must have the same maximum output power.

Turning On The Enclosure

Figure 7. Enclosure Power Button

Press the power button on the enclosure. The power indicator should light.

NOTE: Once you have connected the system to the power supplies, there may be a minimal delay before you can

turn on your system.