Dell PowerEdge R320 Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Сервер Dell PowerEdge R320. Dell PowerEdge R320 11 страниц. Poweredge series
Также для Dell PowerEdge R320: Руководство по началу работы (11 страниц), Технические характеристики (2 страниц), Руководство по портфолио (27 страниц), Руководство по началу работы (9 страниц), Руководство по началу работы (9 страниц)

Cable Routing Procedures for Dell PowerEdge R320 & R420 Systems

Figure 4.

1.3.2. Left-side mounting instructions

1. Install the CMA on the rear left side of the rails by attaching both CMA housings to the attachment

brackets on the rails.

2. Route the cables through the CMA while avoiding twisting the cables. Use the hook-and-loop straps

on the CMA to secure the cables.

3. If the cable bundle includes a keyboard, video, and mouse system interface pod (KVM SIP), it can

be placed inside the CMA basket for light to medium cable loads. If the KVM SIP will not fit inside

the basket with the other cables, attach it to the exterior of the front basket as shown in Figure 5.

4. Once you have routed all of the cables through the CMA, dress the cable slack between the back of

the system and the entrance of the CMA using the tie wraps provided in the CMA kit.

5. Clip off the excess length of material from the tie wraps. Make sure that the heads of the tie wraps

are positioned so as to avoid interference with adjacent systems. Return the CMA to the closed

(retracted) position.

Attaching the inner CMA attachment bracket

Figure 5.

Routing the cables through the CMA

NOTE: Do not store excess cable

slack inside the CMA. The cables

may protrude through the CMA, thus

causing binding and potentially

damaging the cables.

Cables entering the CMA should have a

small amount of slack to avoid cable

strain when the CMA is extended.

KVM SIP can be attached to the

outside of the CMA basket if

necessary using the hook-and-loop

straps provided on the CMA.