Dell PowerEdge R410 Техническое руководство - Страница 5

Просмотреть онлайн или скачать pdf Техническое руководство для Сервер Dell PowerEdge R410. Dell PowerEdge R410 48 страниц. Entry 2-socket 1u rack server
Также для Dell PowerEdge R410: Обновление документации (14 страниц), Руководство по развертыванию (10 страниц), Обновление информации (38 страниц), Руководство по обновлению (44 страниц), Руководство (12 страниц), Руководство по портфолио (27 страниц), Технические характеристики (2 страниц)

Печатать страницу
Dell PowerEdge R410 Техническое руководство
PowerEdge R410 Technical Guidebook

1 Product Comparison

1.1 Overview

The PowerEdge R410 is Dell's entry 2-socket 1U rack server that supports the latest Intel chipset and
processors. With the new Intel architecture, the memory controller is built in the processor and each
processor in PowerEdge R410 supports 4 DIMMs. If two processors are installed, it supports 8 DIMMs
max. Dell introduces four 3.5" hard drive bays to maximize the storage capacity in this product space.
R410 also offers state-of-art features, including: hot-swap hard drive, redundant power supply, 2.5"
SAS or SSD, and quad pack LED or active LCD for diagnostic. The PowerEdge R410 also supports
Dell's latest remote server management controller and iDRAC6, to easily manage the server.
Feature/Spec
Processor
Front Side Bus
# Processors
# Cores
L2/L3 Cache
Chipset
DIMMs
Min/Max RAM
HD Bays
HD Types
Ext Drive Bay(s)
Embedded HD
Controller
Optional Storage
Controller
Dell
Table 1.
Comparison of R410 to SC1435 and R610
R410
Two-Socket Intel® Xeon®
processor 5500 series
IQP at 6.4 GT/s
1 to 2
Dual or Quad
4 MB or 8 MB
Intel® 5500 chipset
4+4 DDR3
Unbuffered with ECC or
Registered with ECC
1333/1066/800M Hz
1 GB/64 GB
4 x 3.5"
Optional Hot-Swap
Support 2.5" HDDs via
Hot-Swap tray
Default SATA. Optional
SAS and SSD via add-in
controller
1 for slim ODD
Chipset based SATA
NON-RAID:
SAS 5/E
LSI 2032 (For TBU only)
RAID:
SAS 6/iR Modular
PERC 6/i, PERC 6/E
SC1435 (Predecessors)
AMD Opteron 2XXX
series
1 GBz HyperTransport
1 or 2
Dual or Quad
HT2100 + HT1000
8 DDR2
Registered with ECC
667 MHz
512 MB/32 GB
2x 3.5"
Default SATA. Optional
SAS via add-in controller
1 for slim ODD
Chipset based SATA
SAS 5/iR
SAS 6/iR
R610
(Next level up)
Two-Socket Intel Xeon
processor 5500 series
IQP at 6.4 GT/s
1 to 2
Dual or Quad
4 MB or 8 MB
Intel® 5520 chipset
6+6 DDR3
Unbuffered with ECC or
Registered with ECC
1333/1066/800 MHz
1 GB/96 GB
6 x 2.5" Hot-Swap
SAS or SSD
1 for slim ODD
SAS 6/iR
NON-RAID:
SAS 5/E
LSI 2032 (For TBU only)
RAID:
SAS 6/iR (Default)
PERC 6/i, PERC 6/E
1