Dell PowerVault LTO3-080 Руководство - Страница 8

Просмотреть онлайн или скачать pdf Руководство для Сервер Dell PowerVault LTO3-080. Dell PowerVault LTO3-080 37 страниц. Powervault tape systems
Также для Dell PowerVault LTO3-080: Руководство по началу работы (10 страниц), Примечание к выпуску (16 страниц), Руководство (12 страниц), Руководство (24 страниц), Руководство (23 страниц), Руководство (48 страниц), Справочник (28 страниц)

Smartdisk Home >> foundation >> bin >> smartdisk(.sh/.bat) config --add --gc-window Anytime

Smartdisk Home >> foundation >> bin >> smartdisk(.sh/.bat) config --add --dedupe-window Never

Finally if you are configuring SmartDisk on a CIFS / UNC path hosted on the DR4X00 it is recommended that a block

size of 512000 be set before data protection operations are conducted from the target configuration. In order to set

the block size of the SmartDisk instance run the following command:

Smartdisk Home >> foundation >> bin >> smartdisk(.sh/.bat) config --update –webdav 37453 --block-size 512000

Note: By default the block size is set to 32 and the webdav port to 37543. These settings should be considered when

using the above for reference.

Once the configuration settings have been applied the SmartDisk services should be restarted. Execute the following

command as needed:

Smartdisk Home >> foundation >> bin >> smartdisk(.sh/.bat) restart

The newly configured SmartDisk instance should be ready for use within a given NetVault Backup domain. Verification

of the newly configurated volumes and attributes should be conducted by running the following command:

Smartdisk Home >> foundation >> bin >> smartdisk(.sh/.bat) config --show

Once all settings have been verified and the configuration has been deemed fit for use the SmartDisk instance can

now be added to the NetVault Backup server.

Setting up NetVault SmartDisk on the Dell™ DR4X00 Disk Backup Appliance