Avue G40 Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Камера безопасности Avue G40. Avue G40 14 страниц. Middle speed dome camera series
Печатать страницу6.OSD - Motion, Clear
Motion control
M O T I ON
AUTO FLIP: Auto. image flip, tilt range from 90° to
180°.
AUTO FLIP
ON
PROPORTION PAN
ON
PROPORTIONAL PAN: Depending on the zoom
PARK TIME
000
factor, the dome will adjust the pan and tilt speed
PARK ACTION
NONE
automatically for comfortable viewing.
POWER UP ACTION NONE
PARK TIME: Defines the idle time prior to start a
FAN ENABLED
040
custom defined action (park action).The duration can
BACK
vary from 1 to 240 minutes. This function can
EXIT
bedisabled by setting the minute to 0.
PARK ACTION: The action which will be started after
the idle time (park time). Selectable between Preset,
Scan, Pattern (Nr), Tour or None.
POWER UP ACTION: Action which starts after power
up and self test. Selectable between Auto, Preset 1,
Scan, Pattern (Nr), Tour or None. By selecting Auto,
the dome will resume the last action before power off.
FAN ENABLED: Defines the temperature limit (in °C)
at which the internal cooling starts operating. The
standard limit is 40°C.
Clear
CLEAR
You can clear setting's memory or reset the camera to
factory default. The follwing functions are supported:
CLEAR ALL ZONES
CLEAR ALL PRESETS
CLEAR ALL PATTERNS
- Clear all zones
CLEAR ALL TOURS
- Clear all presets
CLEAR ALL WINDOWS
FACTORY DEFAULTS
- Clear all patterns
RESTART
- Clear all tours
BACK
EXIT
- Clear all windows
- Factory defaults
Warning: The clear action cannot be undone.
Once an item is cleared it is impossible to
retrieve the deleted setting. Please make sure
that the requested clear action is desired.
13
Some products may not be available in your country, please contact our distributor for more details
6.OSD - Camera Setting
Camera Setting
C A M E R A
S E T T I N G
In the camera setting menu, you can access camera module
ZOOM SPEED
HIGH
related settings. Please note that depending on module's
DIGITAL ZOOM
OFF
capability, some functions may not be available. Please
BLC MODE
OFF
SLOW SHUTTER
ON
contact your local sales representative for detailed
IR CUT FILTER
AUTO
information.
LINE SYNC
OFF
WDR MODE
OFF
ZOOM SPEED: Defines the speed whith which zoom
ADVANCE SETTING
functions are performed.
BACK
EXIT
DIGITAL ZOOM: Activates or deactivates the camera
module's digital zoom function.
BLC MODE: Selects the Back Light Compensation mode
which improves the image when an object has strong back
light.
SLOW SHUTTER: Activates the Slow Shutter function of the
camera, which provides a higher light sensibility in low-lit
environments.
IR CUT FILTER: Enables the removal of Infrared Cutter
Filter (IRC), also known as "DAY/NIGHT" mode. Enabling
the IRC the camera turns into Black/White mode and has
higher sensibility to low-light situations or turns on the IR-
light, depending on the light condition. Selectable between
On, Off or Auto. Only available on camera modules with IRC
function.
LINE SYNC: Enables and disables Line Synchronization.
Advanced Setting
ADVA NCE SETTING
Under the advanced setting, you can make
AE MODE
AUTO
improvements tothe image quality depending on
SHUTTER
N/A
different environmental conditions.
IRIS
N/A
BRIGHT
N/A
AE MODE: Auto Exposure mode. Depends on the light
WB MODE
AUTO
condition in the surveillance area, you can set the AE in
R GAIN
N/A
B GAIN
N/A
different modes and adjust the parameters, such as
BACK
shutter speed, iris factor and brightness for the best
EXIT
image quality.
WB MODE: White Balance mode, an image improvement
based on DSP processing. You can also adjust the Red-
Gain or Blue-Gain to change the color tone.
Hi-RESOLUTION: Switch between 470-530 TVL (only
with FCB-1010P)
Some products may not be available in your country, please contact our distributor for more details
14