Dell Inspiron 1000 Руководство по эксплуатации - Страница 15

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Хранение Dell Inspiron 1000. Dell Inspiron 1000 46 страниц. Dell vostro 1000 quick setup guide
Также для Dell Inspiron 1000: Руководство по настройке (2 страниц), Извлечение жесткого диска (9 страниц), Технические характеристики (2 страниц), Руководство по настройке (2 страниц), Руководство по настройке (2 страниц), Настройка компьютера (2 страниц), Настройка компьютера (2 страниц)

Печатать страницу
Dell Inspiron 1000 Руководство по эксплуатации
Back to Contents Page
  Display Assembly
Dell™ Latitude™ 131L/
Dell Vostro™ 1000 Service Manual
  Removing the Display Assembly
  Replacing the Display Assembly
  Display Bezel
  Display Panel
  Display Latch
 
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
computer.
 Removing the Display Assembly
 
1. Follow the instructions in
Before You
 
2. Remove the hinge cover (see
 
3. Remove the keyboard (see
 
4. Close the display and turn the computer upside down.
 
5. Remove the two M2.5 x 8-mm screws that hold the display to the bottom of the computer.
1
M2.5 x 8-mm screws (2)
 
6. Remove the two screw covers from the back of the computer; then, remove the two M2.5 x 8-mm screws from the back of the computer.
1
M2.5 x 8-mm screws (2)
 
7. Turn the computer over and open the display.
 
8. Remove the two M2.5 x 5-mm screws on the display hinge.
 
9. Disconnect the antenna cables from the Mini-Card and dislodge the cables from the antenna cable channel.
 
10. Loosen the captive grounding-wire screw and dislodge the display cable from the display cable channel.
 
11. Pull the pull-tab straight up to disconnect the display cable from the system board.
Begin.
Removing the Hinge
Cover).
Removing the
Keyboard).
2
bottom of computer
2
back of computer
Before Working Inside Your
Computer) before working inside the