Dell PowerVault 50F Руководство по установке стойки - Страница 21

Просмотреть онлайн или скачать pdf Руководство по установке стойки для Хранение Dell PowerVault 50F. Dell PowerVault 50F 28 страниц. Dell powervault 56f switches rack installation guide
Также для Dell PowerVault 50F: Руководство по подключению (38 страниц), Руководство по установке (8 страниц), Руководство пользователя (42 страниц)

support.dell.com

NOTE: If the slide assemblies were preinstalled by Dell, you can skip this section.

You must allow 2 U (3.5 inches) of vertical space for each PowerVault 56F switch you

install in the rack.

NOTE: The vertical rails of the rack are marked by small indentations in 1-U incre-

ments (see Figure 6).

1 U (1.75 inches)

For more information about requirements for installing components in a Dell rack, see

the Dell Rack Advisor software available on the Dell Web site at:

http://support.dell.com.

To install the slide assemblies in the rack, perform the following steps:

NOTE: Each slide assembly has a fixed (non-adjustable) and floating (adjustable)

mounting bracket. When installing the slide assemblies in the rack, make sure that

the fixed mounting bracket is mounted at the front of the rack; otherwise, you will not

be able to install the switch.

Place the front of the template on the vertical rails at the front of the rack where

you want to install the switch.

Ensure that the printing on the template identifies the side facing outwards as

the template front.

Dell PowerVault 56F Systems Rack Installation Guide